In this article we will try to teach you how to perfectly Clean Roomba Vacuum Cleaner. Roomba is a compact, computer-controlled vacuum cleaner that automatically navigates through your home. Like a conventional cleaner, it picks up dirt using rotating brushes and a vacuum cleaner. There’s a side-mounted, flapping brush that pushes the dirt under the machine, and there two more counter-rotating brushes (spinning in opposite directions) pick up the dirt and direct it to the powerful vacuum, which sucks it away a bit into the storage bin. Unlike a regular cleaner, Roomba moves through your room with two large, tractor-style wheels, each independently powered by a separate electric motor.

There’s a lot more to keeping your Roomba clean than just emptying its bin every now and then. For example, take a close look at your Roomba’s brushes and you’ll likely see that they’ve become tangled in hair. A Roomba’s fall sensors that keep it from falling down the stairs can also become blocked by a layer of dirt, while its dust filter gradually becomes clogged with debris. Below we have mention the steps to Empty and Clean Roomba Vacuum Cleaner.

Step 1: Press the bin release button on the back of the robot to remove the bin. The bin release tab has a bin icon on it.

Step 2: Open the bin door to empty the bin’s contents in your trash can. The bin door release button has a bin icon.

Step 3: Grasp the side of the filter to remove the filter from the left side of the bin.

Step 4: Shake off debris by tapping the filter against your trash container. Then, replace the filter. Note: Filters are not designed to be washed or to come in contact with liquid.

Step 5: Rinse out excess debris with warm water and allow the bin to dry. Ensure the bin is completely dry.Note: The bin is designed to be rinsed by hand only. It is not dishwasher safe and should only be cleaned by rinsing with warm water.

Step 6: Place the filter back into the bin.

Step 7: Slide the bin into the bin slot, securing it into place.

Step 1: Open the cleaning head module door by pushing on the green tab on the right side of the multi-surface brushes.

Step 2: Remove the brushes from the robot and ensure hair and debris are removed from the square and hex pegs of the multi-surface brushes.

Step 3: Clear debris on and under the gray bearings.

Step 4: Insert the bearings on the multi-surface brushes.

Step 5: Ensure the vacuum path is clear.

Step 6: Match the shape of the multi-surface brushes pegs with the shape on the cleaning head module.

Your Roomba vacuum’s cliff sensors do exactly what they say they do. They prevent your device from jumping off a “cliff”… or rather, a staircase in your house or balcony if you live in an apartment. These functions work by reflecting infrared light off the surface photocell sensors.

Step 1: Grasp the side of the filter to remove the filter from the left side of the bin.

Step 2: Shake off debris by tapping the filter against your trash container. Then, replace the filter.

Step 3: Slide the bin into the bin slot, securing it into place.

Step 1: Pull firmly on the front wheel to remove it.

Step 2: Remove any debris from inside the wheel cavity.

Step 3: Spin the wheel by hand. If rotation is restricted, remove the wheel from its housing and push firmly to remove the axle and clear any debris or hair wrapped around it.

Step 4: Reinstall all parts when finished. Make sure the wheel clicks back into place.

Step 1: Loosen the edge sweeping brush with a coin or small screwdriver.

Step 3: Remove any debris from the edge sweeping brush and the post of the edge sweeping brush module.

Step 4: Reinstall the edge sweeping brush.

We hope our article on how to Clean Roomba Vacuum Cleaner carefully will help you and resolve all your problems. Roomba’s makers, iRobot Corporation, describe their creation as a “robot vacuum cleaner” — and that’s a fair and accurate description. Just like the industrial robots that weld cars in factories, it follows a set of pre-programmed instructions, but also uses some built-in “intelligence” to figure out what to do and how to do it. If you want to know how to completely clean it then follow the steps mentioned above.

I hope you understand this article, How to Empty and Clean Roomba Vacuum Cleaner.

© Tofido Publishing Media Network Limited.

Bollyinside provides you the latest Guides, Tech Tips and tutorials. Which you find here: So never forget to check our Bollyinside Blogs, for technology computer mobile guides and Tips, Top lists, best 10, and bussiness guides.

Bollyinside is part of Tofido ltd, an international media group and leading digital publisher.